Elecrow HMI Display

Discussion	Started By	Replies	Views	Most Recent
Settings to note when developing CrowPanel ESP32 7.0-inch display v3.0 via ESP-IDF	Minjun July 2025	3	2.3K	BarryStreek September 2025
Another Flickering Advance V1.2 question need some help	Phil91 September 2025	1	649	Jully September 2025
Can I connect two UARTs to CrowPanel 4.3" basic	Jully September 2025	0	398	Jully September 2025
could you kindly provide the 3D design file (.stl or similar) for the Elecrow RC070S enclosure/case	Jully September 2025	0	411	Jully September 2025
on the CrowPanel Advance 7.0, I wish to have a tft card plus a nRF2401 module , is it possible ?	Jully September 2025	0	273	Jully September 2025
why does not my DIS02170A(CrowPanel Advance 7“ HMI) with the lora add-on module support meshtastic	Jully August 2025	0	482	Jully August 2025
7" V1.2 Crowpanel with SX1262 plug in Lora module (non meshtastic)	Phil91 August 2025	0	360	Phil91 August 2025
which kind of battery i should use for crowpanel basic and advance series devices?	Jully August 2025	0	409	Jully August 2025
LVGL differences between crowpanel bassic 5" and crowpanel advance 5", i wanna get a program ported	Jully August 2025	0	456	Jully August 2025
Why isn't serial port on 2.13-inch e-paper device showing up on computer? but 2.9-inch e-paper can	Jully August 2025	0	334	Jully August 2025