Wizee-ESP32-s3 wz8048c050 5" HMI TFT problems.

Comments

• Elecrow

  August 2023

  Hello @Old_nerd

  Please try to follow:

  This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

  How to upload the ESP32 display factory program by Arduino IDE?

  adminAug 17, 2023

  Step 1 Download the Arduino IDE

  https://www.arduino.cc/en/software/

  Step 2 After downloading the Arduino IDE, click on"File-->Preference", and add the ESP32 S3 URL(https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json) to "Board Manager URLs" as follows：

  https://forum.elecrow.com/uploads/765/N4C7G983Y9SQ.jpg

  Step 3 Click "Tool-->Board-->Board Manager", and search for "esp32". It is recommended to install version 2.0.3

  https://forum.elecrow.com/uploads/540/R7JDDRHM1F0U.jpg

  https://forum.elecrow.com/uploads/000/XBRN6S06BLHR.jpg

  Step 4 Install the libraries provided by Elecrow:

  ESP Terminal:

  https://drive.google.com/drive/folders/1FCtqplozHlWF6Fn1isYb3hYmU6ssp-AA?usp=sharing

  ESP32 HMI Display:

  https://drive.google.com/drive/folders/1StdAWhXHArhyw5HFpCY-xulWdZYrFAGz?usp=sharing

  Step 5 Download and open the factory program.

  https://drive.google.com/drive/folders/1lI9aVzhQsS_rPqQ7_O8gqIa_BeDgOYGC?usp=sharing

  https://drive.google.com/drive/folders/1AD6X8-iQweTD_pzCep04F8tPfKL5wZwr?usp=sharing

  https://drive.google.com/drive/folders/1csAHy6yGEJooUBU4CS6zFEW1mrDFeCTc?usp=sharing

  Step 6 Choose the board and set the parameter

  ✨ESP Terminal RGB&SPI

  https://forum.elecrow.com/uploads/537/5FNIH4U94DWB.jpg

  ✨ESP32 HMI Display 2.4''&2.8''&3.5''

  https://forum.elecrow.com/uploads/556/LQO92DLQVJY4.jpg

  ✨ESP32 HMI Display 4.3''

  https://forum.elecrow.com/uploads/298/7994ZWZ1NIH7.jpg

  ✨ESP32 HMI Display 5.0''&7.0''

  https://forum.elecrow.com/uploads/590/TB1ITWFRL9TN.jpg

  Step 7 Choose the correct port number. Open the serial monitor. Press and hold the "BOOT" button and press the "RESET" button, the serial monitor shows "waiting for download".

  https://forum.elecrow.com/uploads/826/6JITZL0AII1F.jpg

  https://forum.elecrow.com/uploads/374/C3N8CMDUH0JM.png

  Step 8 Then click on "Upload" and wait for the compilation and download...

  Step 9 When the progress finishes, press the RESET button then the program will run on ESP32 display.

  
  

  Or you can upload the "Hello World" sketch instead.

  This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

  LvglWidgets-5.0-helloworld.zip

  2.54 KB

  
  

  Hope this will help.