Wizee-ESP32-s3 wz8048c050 5" HMI TFT problems.

Old_nerd

Where do I find the Arduino files for this display everything I've tried so far I'm just getting a black display

Thanks for your help

Elecrow

Hello @Old_nerd

Please try to follow:

This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

How to upload the ESP32 display factory program by Arduino IDE?

adminAug 17, 2023

Step 1 Download the Arduino IDE

https://www.arduino.cc/en/software/

Step 2 After downloading the Arduino IDE, click on"File-->Preference", and add the ESP32 S3 URL(https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json) to "Board Manager URLs" as follows：

https://forum.elecrow.com/uploads/765/N4C7G983Y9SQ.jpg

Step 3 Click "Tool-->Board-->Board Manager", and search for "esp32". It is recommended to install version 2.0.3

https://forum.elecrow.com/uploads/540/R7JDDRHM1F0U.jpg

https://forum.elecrow.com/uploads/000/XBRN6S06BLHR.jpg

Step 4 Install the libraries provided by Elecrow:

ESP Terminal:

https://drive.google.com/drive/folders/1FCtqplozHlWF6Fn1isYb3hYmU6ssp-AA?usp=sharing

ESP32 HMI Display:

https://drive.google.com/drive/folders/1StdAWhXHArhyw5HFpCY-xulWdZYrFAGz?usp=sharing

Step 5 Download and open the factory program.

https://drive.google.com/drive/folders/1lI9aVzhQsS_rPqQ7_O8gqIa_BeDgOYGC?usp=sharing

https://drive.google.com/drive/folders/1AD6X8-iQweTD_pzCep04F8tPfKL5wZwr?usp=sharing

https://drive.google.com/drive/folders/1csAHy6yGEJooUBU4CS6zFEW1mrDFeCTc?usp=sharing

Step 6 Choose the board and set the parameter

✨ESP Terminal RGB&SPI

https://forum.elecrow.com/uploads/537/5FNIH4U94DWB.jpg

✨ESP32 HMI Display 2.4''&2.8''&3.5''

https://forum.elecrow.com/uploads/556/LQO92DLQVJY4.jpg

✨ESP32 HMI Display 4.3''

https://forum.elecrow.com/uploads/298/7994ZWZ1NIH7.jpg

✨ESP32 HMI Display 5.0''&7.0''

https://forum.elecrow.com/uploads/590/TB1ITWFRL9TN.jpg

Step 7 Choose the correct port number. Open the serial monitor. Press and hold the "BOOT" button and press the "RESET" button, the serial monitor shows "waiting for download".

https://forum.elecrow.com/uploads/826/6JITZL0AII1F.jpg

https://forum.elecrow.com/uploads/374/C3N8CMDUH0JM.png

Step 8 Then click on "Upload" and wait for the compilation and download...

Step 9 When the progress finishes, press the RESET button then the program will run on ESP32 display.

---

View Post

Or you can upload the "Hello World" sketch instead.

This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

LvglWidgets-5.0-helloworld.zip

2.54 KB

Hope this will help.