CrowPanel ESP32S3 Display - 7.0 inch Advance_series SKU: DIS02170A V1.3
Is anyone kind enough to provide me with a very Simple "Hello World" Sketch of this 7 inch display.
I am ready to send the two units I bought back as I have spent endless hours trying to make it work. The ESP32-2432028R Yellow 2.8 is easy but so far my 100's of attempts are a disaster. I also have the 5" working but it seems to lack a UART output. The Internet and chat GPT have proven to not work trying various combinations.
Thanks,
Blair
Comments
Dear BlairKent,
We apologize for any inconvenience caused.
For SKU: DIS02170A V1.3, the following link contains tutorials and sample code for the Arduino IDE platform. Please try it:
https://www.elecrow.com/pub/wiki/HMI_Display_course.html#version-13
For development environment configuration, please also refer to the following link: (Or, if you encounter problems using our sample code or our tutorials, please see the following link:)
https://forum.elecrow.com/discussion/28091/errors-or-black-screen-after-uploading-sample-programs-in-the-hmi-advance-esp32-s3-series#latest
Thanks!
Warm regards,
I'm using 7inch panel V1.4. Is there anywhere a valid pinout or at least a datasheet. I can't get it working with the lgfxDrivers of V1.3
Hi guntherb,
We have schematics here: pls have a look. hope it can help you.
https://github.com/Elecrow-RD/CrowPanel-Advance-7-HMI-ESP32-S3-AI-Powered-IPS-Touch-Screen-800x480/tree/master/Eagle_SCH&PCB/version1.4
Warm regards,
First: thanks for your quick reply. I've seen the related pdf-file, but in contrast to v1.3's pdf, I couldn't find out the relations between GPIO's and colors. Would you take the time and have a look? I got really serious problems in getting the display work ...
Thanks in advance, regards günther