Jully
Jully
About
- Username
- Jully
- Joined
- Visits
- 1,175
- Last Active
- Roles
- Moderator, user_manager
Comments
-
Hi, treo, Thank you for reaching out. Here is some information about your questions. 1. All versions of CrowPi 1 use a 12V 2A power adapter. 2. If powering through the Micro USB port, a 5V 5A power adapter is required. 3. Based on your description, …
-
(Quote) Hi, matatools, Thank you for reaching out. You can use a 90-degree angled USB-C cable to connect to the CrowPanel's USB-C port for power supply, or wire an external power source to the CrowPanel's BAT interface. If you need further assista…
-
Hi Acuario, Thank you for your suggestions. We will record them and carefully consider them for future updates. Additionally, Both of our displays support customization. If you have bulk requirements, we can make changes for you. You can contact thi…
-
Hi, MiWa, Thank you for your feedback. We are sorry for the inconvenince. Since this issue may be related to coding and openHASP, we recommend that you post your question on the Discussions area of the following webpage to discuss it with others: …
-
Hi CrowSloth, Thank you for reaching out. The power adapter is available for purchase separately. Please contact us via email at techsupport3@elecrow.com, and our team will assist you with your request. Let us know if you need any further help!
-
Hi, matatools, Thank you for reaching out. Please check whether the power supply meets the 3.7-4.2V, 2A specification. Normally, it should work this way, but please ensure that the polarity is not reversed. If you need further assistance, feel fre…
-
Hi Osbornejeremy, Based on your description, here’s some information that may help: The Base Shield is designed to expand the interfaces but does not supply power to the Micro:bit. When using the Micro:bit with the Crowtail Base Shield, the Micro:…
-
Hi, Rayant, Thank you for your reaching out to us. You can use an ADC module like ADS1115 to obtain analog values, as our pins of CrowPanel 7.0 do not support direct analog input. If you have further questions, feel free to contact us.
-
(Quote) Hi, Matt10f3, Thank you for your feedback. I am sorry for the inconvenince. Using the SD card and touch functionality normally should not conflict. Please provide your code for analysis. Additionally, could you confirm whether the DIS06043…
-
Hi sirocco, The correct spec for the UART0-IN connector is: XH2.54-4. If you have further questions, feel free to contact us.