Jully
Jully
About
- Username
- Jully
- Joined
- Visits
- 1,175
- Last Active
- Roles
- Moderator, user_manager
Comments
-
Hi, Eugene1951 In order for us to further understand your need , please provide the link path for the information of "ESP32 HMI Demo Code Updated - compatible with new version of esp32 package", which was given in your post title. Additio…
-
(Quote) Hi bairloch, For further customer service, please contact us via email at techsupport3@elecrow.com. In your email, please kindly provide your order number for the products, and we will assist you in resolving the issue.
-
Hi, wolfcruel， You can wire it this way and ESP32 supports soft serial port, but the effect of soft serial port is not as good as hard serial port and there may be data loss. Optionally, you can use crowpanel 2.8inch in this way: u-blox M8N GPS …
-
Hi, Jan, Thank you for your suggestion. We will record it and consider whether to make example codes for this case. Please stay tuned for updates on our website: www.elecrow.com.
-
Hi, Eugene1951, This is the course link for CrowPanel Advance 5.0-HMI ESP32 AI Display: https://www.elecrow.com/wiki/HMI_Display_course.html Please check the corresponding courses according to the product name. If you have further questions, feel fr…
-
Hi, ummbanaso, Do you mean you coded according the lesson 5 on youtube? To fix your problem, Please confirm: whether the esp32 version (search and install from Arduino's BOARDS MANAGER) is 2.0.14, whether the library file is downloaded from our webs…
-
Thank you for your suggestion. We will record it and consider whether to carry out product research and development. Please stay tuned for product updates on our website: www.elecrow.com. Additionally, Customized requests can be discussed(based on M…
-
Hi bairloch. If you want to make sure that the touchpad is in an available state. You can change the touchpad status by F2 or Fn+F2. when tapping F2 doesnot work, you can try to tap Fn+F2. To rule out keyboard and touchpad issues, remove Bridge …
-
The development work of Pi Terminal-7” HMI Panel compatible with CM5 has been completed, but it is now in the testing stage. Please stay tuned for updates on our website: www.elecrow.com.
-
Dear @lokee , Please use a multimeter to measure whether there is 3.3v.If not ,it's probably a bad circuit board. (Image) You can contact our techsupport@elecrow.com email for follow-up support.