Comments

• Found both units did not have the connector clamped down and cable was loose. Problem fixed thanks. Both units came from the factory not secured. Thanks for the reply.

  in Esp32S3 7” Advance panel V1.3 and V1.4 no touch screen. Comment by BlairKent July 6
• Try lowering to this. Mine had the same issue and reducing the frequency from 21000000 to 13000000 worked. cfg.freq_write = 13000000;

  in CrowPanel 5.0" (ESP32-S3): Screen artifacts and screen jitter in portrait mode Comment by BlairKent March 31
• Jennie This is the product from Amazon.ca www.amazon.ca/dp/B0DL5WB7RQ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 ESP32 Display-5 inch SKU DIS07050H V3.0 As best I can see this model does not have an external UART output for transmit and receive unle…

  in Elecrow 5" ESP32S3 connecting with XBee module and GPIO_D Comment by BlairKent March 6