CrowPi blinks continuously when plugged in. Does not power up.
When I plug in the power to the board, the LEDs flash continuously and never boots,. It looks like it is trying to start but fails and so on in a loop.
Video of issue and image of powr adapter:
https://imgur.com/a/bQ2M1Oh
Comments
Hello @frakman ,
Sorry for the inconvenience caused.
Please follow the steps below to troubleshoot the problem:
1. Replace the power adapter to determine if there is a problem with the power adapter.
2. Check if the connection of the Raspberry Pi 3 is correct, especially the 40pin GPIO
3. Start without installing the Raspberry Pi 3 and see if the LED light on the motherboard on the Crowpi flashes.