CrowPi2 LCD Screen Dead
I have recently bought a CrowPi2 which is used and the seller said it works OK. I ordered an RPi4 with a new SD card and installed the OS. When I appy power, the unit turns and the green LED on the RPi4 flashes showing some activity. Various green LED's are lit on the I/O pins and fan is running but the LCD is completely dead.
I have tested the CrowPi2 with a good 12v adaptor and a USB PowerBank. I have looked very closely at the screen to see if there is any screen activity that can be seen even without the LCD backlight on and there is absolutley nothing.
Can anyone give me some advice here?
Comments
Hello @Jomac ,
Was there an "Elecrow" icon on the screen?