Elecrow HMI Display

Discussion List

Discussion
Started By
Replies
Views
Most Recent
Strange Error when compiling Lesson 4 (Drawing board) 7 inch V3.0 12
roycejproycejp
12
1.5K
JennieJennie
CrowPanel 7" Display DIS08070H will not compile Demo Lessons 4, 5 or 6
rjp663rjp663
7
610
roycejproycejp
CrowPanel 2.1inch-HMI ESP32 Rotary Display ,arduino IDE says sketch is too large when uploading
JennieJennie
2
173
JennieJennie
are there products that currently have that are compatible with Meshtastic?
JennieJennie
0
68
JennieJennie
Got affiliate link for FluidTouch author when I buy Advance 7inch IPS display?
AzaB2CAzaB2C
1
311
Doreen1020Doreen1020
Connect to ESP-C3 on CrowPanel-Advanced-7inch-ESP32-P4-HMI-AI-Display for WLAN
InbuxInbux
2
270
JennieJennie
i have 7-inch Crowpanel (DIS08070H), got an error when running the course/example programs
JennieJennie
0
202
JennieJennie
Is there a Buzzer or speaker that pairs this CrowPanel 2.8"-ESP32 HMI 320x240 Display with ?
JennieJennie
0
128
JennieJennie
I have a CrowPanel ESP32 5.79inch E-paper HMI Display. What No. pin out for cs,dc,rst,busy.
JennieJennie
0
134
JennieJennie
I use CrowPanel 7.0" -HMI ESP32 Display(DIS08070H),Not one of the sample programs worked.
JennieJennie
0
204
JennieJennie

© Elecrow Stone 2026