CrowPi2 startup can't get to the graphics page
My CrowPi 2 was working fine since I have it. Now it brings up this coding screen on startup. About SSH is enabled and the default password has not been changed. It says please login and change password.
Tagged:
Comments
Here are four solutions to try：
1. The password may be raspberry or 1.
2. Try to re-burn the image https://forum.elecrow.com/discussion/227/how-to-update-the-crowpi2-os-image .
3.Enter 'startx' and press Enter to directly enter the graphical interface.
4.After entering the command line "sudo raspi-config", select "1 system options" and then select "S5 Boot/Auto Login". Choose "B4" to complete the modification. Restart the system to enter the graphical interface.