Jully
Jully
About
- Username
- Jully
- Joined
- Visits
- 1,175
- Last Active
- Roles
- Moderator, user_manager
Comments
-
(Quote) Hi mshettha, Thanks for your patience and understanding. I am really sorry for the delayed response due to public holidays. Have you used other devices for comparison testing? Can other sensors work, or can this sensor be used on other hosts?
-
(Quote) Dear penatar, Thank you for reaching out. Our technical support team is currently looking into the issue in your message. Please be patient, and we will get back to you as soon as possible. Thanks! Have a good day!
-
Hi dsrc12， Please make sure to install esp32 version 2.0.14 or 2.0.15 as installing other versions will cause errors (Image)
-
Hi dfr84, We are sorry that there is no 3D model at the moment, but we will arrange to draw it soon. Please pay attention to the updates on our website and wiki. Thank you! Have a good day!
-
Hi Jamess2345， As we have been comunicating via email, please check email for our response. Thanks!
-
(Quote) Hi mcevylder, I hope this email finds you well. Thank you for your patience and understanding . We are sorry for the inconvenience caused. Our technical support team is currently looking into the issue in your post. Please be patient, and we…
-
Hi MungoBBQ, The battery interface type of this product is: SH1.0, 2Pin, and the battery voltage requirement is 3.7V. It is OK to buy batteries that meet the above specifications both in online platforms or offline stores. Thanks!
-
Dear Penatar, Thank you for your patience while we were looking into this issue. The sensor you are using is a 1-Wire interface and cannot be used on the i2c port. The i2c port and the touch function share pins, and both require an i2c interface to …
-
Dear Wayman， Hope you are doing well. Thank you for your patience in troubleshooting the issue. Apologize for our delayed response due to the weekend holiday. We are very sorry, since this problem does not exist in our example programs, you need to…
-
Hi dfr84, Thank you for reaching out. We are sorry for the inconvenience caused. Our technical support team is currently looking into the issue in your feedback. Please be patient, and we will get back to you as soon as possible. Best regards,