tony
tony
About
- Username
- tony
- Joined
- Visits
- 97
- Last Active
- Roles
- Moderator
Comments
-
That's a good idea! Regarding adding a power switch to the CrowPi, I don’t recommend you to do it. We didn’t consider it at the beginning of the design because it would make the whole layout very messy and troublesome, so we added a power switch but…
-
Can you send me a video to show the keyboard problem? You can also send the video to email address tony@elecrow.com
-
Thank you for your suggestion. You need to take out the SD card and use a computer for image burning. But, don’t worry, it can be roughly divided into 3 steps: 1. Download the mirror https://drive.google.com/file/d/1vNiY359ShIS39KHX0jtAyz682MvaxhdK/…
-
Can you please send me a picture to show the problem?
-
Yes, you can use the switch as a GPIO level trigger to control the on and off of the Raspberry Pi. However, even if you turn off the power of the Raspberry Pi by pressing the button, the power of CrowPi1 still needs to be turned off manually.
-
Yes, I think the problem is the converter. From your description, it seems that the signal transfer between the screen and your device is broken, which causes the device can not find the screen. For problems involving third-party hardware, you need …
-
No, you can't. Please don't use any power bank and the DC-12V power port to power the CrowPi2 at the same time. It will damage the power bank battery and may even pose potential safety risks.