nicholasperratt
nicholasperratt
About
- Username
- nicholasperratt
- Joined
- Visits
- 212
- Last Active
- Roles
- Member
Comments
-
https://forum.elecrow.com/discussion/comment/215#Comment_215 Correction I have that pinout, thanks for letting me know
-
Hi there, my touchscreen doesn't use that pinout, it gets its power from the usb
-
Is there any idea what it is?
-
Hi, I was looking around the crowpi a while ago and wondered what the red and black cable is for on the hdmi and data cable, it looks like it goes into the raspberry pi but I have no idea what pinout it would go to or even what it's for https://foru…
-
How could I call the J10 header for variable fan speed? And what's the run global gnd for?
-
.
-
That makes sense, what doesn't make sense is in the picture I provided I had dtoverlay=shutdown and still is now working and messing with the I2C
-
https://forum.elecrow.com/uploads/725/N9C0XENGWPK6.jpg I have the dtoverlay and connected to the pins 5 and 6(gpio3 and gnd) and all that happens is the momentary switch stops the I2C momentarily. I have also tried dtoverlay=gpio-shutdown, gpio_pin…
-
@Pearl That post is extremely helpful. It's very clear and informative. For example I kind of understand why the I2C was clashing as I basically didn't have the dtoverlay which I assume reserves that pin for a default function (a power button for…
-
Is there a script you could recommend?