lboue

About

Username: lboue
Joined: June 5
Visits: 98
Last Active: August 5
Roles: Member

Comments

@Elecrow said: (Quote) What do you mean by esp32 cannot generate the speed required by the driver IC.? Are you talking about a ESP-IDF framework? If it's a software problem, it can be fixed by ESPHome team. esp32: board: esp32-s3-devkitc-1 frame…

in 'Lesson 13 ESPHome' not working with CrowPanel 7.0" Comment by lboue July 25
Thanks. Could you add this to the GitHub repo https://github.com/Elecrow-RD/CrowPanel-ESP32-Display-Course-File?

in CrowPanel 7.0" speaker interface exemple Comment by lboue July 25
Hello. Could I have an answer please @Elecrow?

in CrowPanel 7.0" speaker interface exemple Comment by lboue July 25
Hello. Could I have an answer please?

in 'Lesson 13 ESPHome' not working with CrowPanel 7.0" Comment by lboue July 25
@Elecrow Could you add an example which explains how to use the CrowPanel ESP32 Display 7.0-inch speaker interface?

in CrowPanel 7.0" speaker interface exemple Comment by lboue July 23
(Quote) I meant, how is it possible that the ESP32 clock is too slow for ESPHome and fast enough with an Arduino example. It's the same hardware. It works with openHASP . Also, integrated ESP32-S3 module, frequency up to 240MHz

in 'Lesson 13 ESPHome' not working with CrowPanel 7.0" Comment by lboue July 23
@Elecrow How can it work properly with an Arduino example? The hardware is the same, though.

in 'Lesson 13 ESPHome' not working with CrowPanel 7.0" Comment by lboue July 22
@Elecrow Could you tell me the correct settings to fix the problem with your Lesson 13 ESPHome example file?

in 'Lesson 13 ESPHome' not working with CrowPanel 7.0" Comment by lboue July 20
Thanks @Elecrow

in CrowPanel 7.0" plan with the dimensions for the back panel fixings Comment by lboue July 20
@Elecrow Here are the bindings I'm referring to: (Image)

in CrowPanel 7.0" plan with the dimensions for the back panel fixings Comment by lboue July 16

More Comments