lary
lary
About
- Username
- lary
- Joined
- Visits
- 40
- Last Active
- Roles
- Member
Comments
-
Maybe you can refer to this link to change the display orientation - HDMI Resistive Touch: http://www.lcdwiki.com/res/Show_Direction_and_Touch/How_to_change_display_direction-HDMI-Resistive_Touch-V1.2.pdf Thanks for your support!
-
CrowPi2 is sold in three different kits depending on your needs: the Basic Kit, the Premium Kit, and the Deluxe Kit. the Crowpi2 Basic Kit does not include the Raspberry Pi 4B, the CrowPi2 Premium Kit includes the Raspberry Pi 4B 4G and the Deluxe K…
-
The keyboard is a 2.4Ghz wireless keyboard, not a Bluetooth keyboard. This means that you can connect to the mouse and keyboard by plugging in the receiver without turning on Bluetooth.
-
The answer to your question is as follows: our Python and scratch tutorials are designed from easy to hard to help users understand sensors and get started, and are suitable for primary, middle, and high school, or if you haven't had any exposure to…
-
The CrowPi2 has a microphone, the little black dot next to the camera is the microphone, the camera is only available as a USB camera. In addition, we have a 3.5mm headphone jack on the side of the power socket, you can use headphone options.
-
The answer to your question is as follows. 1. Those craft building entities have RFID tags added inside them and need to be paired with Crowpi2's RFID identification module to function, so they won't work on other actual Minecraft. We haven't tried …
-
You can find the information you need on our blog at the following link: https://www.elecrow.com/blog/the-most-popular-wifi-and-bluetooth-module-in-2021%EF%BC%9Aesp32-wroom-32d.html
-
Crowpi2 is a miniature learning computer based on the Raspberry Pi, is able to run Raspbian, if iRaspbian can run properly on the Raspberry Pi, of course he can also run on our Crowpi2.
-
- If it's turned on and gets unplugged, it will turn on when it's plugged back in. - And you don't have to take the side panel off and turn it on, when you connect the HDMI cable to the screen, the screen will light up as long as there is a power s…
-
you will need to make the following adjustments 1、Install Xinput, execute the following command code in the Raspberry Pi (Note: This installation requires the Raspberry Pi to be connected to the network) sudo rm -rf LCD-show git clone https://git…