Comments

• Any ideas why the demo code only kicks in at y >= 215 ? I changed the I2C address to 0x5D from 0x14 and also the port from 1 to 0 and it still works the same

  in DIS08070H : CrowPanel 7.0" HMI ESP32 Display - TOUCH ISSUE Comment by flyguy156 February 4
• I tried the paint demo code above, and it works, but only for the bottom half of the screen Onlt responds when y > 215. Almost there!

  in DIS08070H : CrowPanel 7.0" HMI ESP32 Display - TOUCH ISSUE Comment by flyguy156 February 2