ektanoor
ektanoor
About
- Username
- ektanoor
- Joined
- Visits
- 36
- Last Active
- Roles
- Member
Comments
-
Yes, packets are coming with the correct timing. Thank you a lot.
-
The binary, configuration and the source. Take note that GPIO pins in reset_lgw.sh are configured for kernel 6.6, where radical changes were made to GPIO. The old numbering DOES NOT work from 6.6 upwards (https://github.com/domoticz/domoticz/issues/…
-
I posted it before, in April 5. Here: https://github.com/Elecrow-RD/LR1302_loraWAN/tree/master
-
Besides, for the moment, I am using the RP2040 LoRaWAN RA-08H as a test base for your gateway. The old version btw. You seem to have a new one. What I am not using is TTN or any cloud stuff to link the gateway to anything else. I use the Chirpstack…
-
Of course. What else I could use if I am writing to you? Look: https://aliexpress.ru/item/1005006280046924.html?sku_id=12000036604526385
-
Tried the commands you suggested, to no avail. Meanwhile, your recommendation gave me a hint to dug up more deep into the code. And found a few things. 1. There is a program to test GPS, including time: sx1302_hal/libloragw/test_loragw_gps . 2. T…
-
Just for your attention. I have had some discussions here with colleagues and came to these conclusions: A little fan is no solution to the problem we have. In short time it will break and break suddenly, as usual. And when that happens, the Rpi/Ora…
-
I am in Moscow time zone, +3GMT as it is known. But usually I set things to UTC as to avoid issues from time zone to time zone. I downloaded from here: https://github.com/Elecrow-RD/LR1302_loraWAN/tree/master I came to this link through your Wiki (h…
-
It may a bit unsolicited but here is a screenshot from chirpstack LoraWAN server. It show that, on uplinks, date and time almost stay that same. On downlinks it always show the correct timing.
-
Managed to send commands to GPS. It was a terminal problem indeed. Didn't want to process cr+lf normally. I tried GPS+GLONASS and all GNSS on. Even Beidou appears from time to time. Coordinates are lost sometimes, yet timings/date keep coming corre…