Comments

• Great opportunity for makers. Before opening a store, make sure your design is production ready, well documented, and tested for reliability. Clear assembly guides and support details also help build buyer trust.

  in Can I Sell My Projects on Elecrow? Comment by Woreen February 15
• For the 3.5 inch display, check the pin behavior. If touch works only after swapping TFT_MISO and Touch_CS, it is likely v2.2. You can also confirm from the product label or order info. For 5 and 7 inch v3.0 screens, ensure the PCA9557 library is a…

  in ESP32 Display Update History Comment by Woreen February 15
• Thanks for sharing the details. Good to see clear answers on hardware and battery behavior, especially the charging indicators and Pi 5 compatibility.

  in CrowPi 3 : A Raspberry Pi 5 powered education kit coming soon to Kickstarter *Gone LIVE on Jun 5th* Comment by Woreen February 15
• If you only have the backlight and no display or touch response, first flash the factory firmware to rule out a hardware fault. If it works after that, the issue is likely library or firmware related. Also confirm you are using ESP32 board package …

  in ESP32 7inch display V3.0 touch isn't work Comment by Woreen February 15