Comments

• Hi @Harol , Please run as an administrator when installing the software.

  in VISUAL_TFT_Build Comment by Winny October 18
• Hello @OEMM Please refer to the wiki page: https://www.elecrow.com/wiki/lora-ra-08h-development-board.html

  in RS485 of ra-08h_development_board Comment by Winny October 18
• Hi @taterchip The boot button is the download button. Please follow the following instruction to let the board enter download mode: (Image)

  in How to boot ra-08h module on dev board Comment by Winny October 18
• Hello @SuperRoach The chip of the 5-inch HMI is ESP32 S3, which doesn't support Bluetooth. And for the error message, please check if the setting is correct(please refer to https://www.elecrow.com/wiki/ESP32_Display_5.0-inch_HMI_Arduino_Tutorial.h…

  in Bluetooth on the 5 inch screen - function not supported? Comment by Winny October 18
• Hi @LouisWahl , Thank you for reaching out. I'm Winny from the Elecrow Team. I have applied for permission to check the code you sent, and I hope you can approve it so that we can better help you find the problem. Thanks in advanced. Best regards, …

  in 5.0 Display shows only black with modified Democode from lesson 6 Comment by Winny October 18
• Hi @Trasparente The code you downloaded from that GitHub repository is not compatible with ESP32 TERMINAL. Please download the example code from here https://www.elecrow.com/download/product/DLC35020S/Arduino_SPI.zip

  in Problems with Display 3.5 CrowPanel 3.5" and Squareline Studio 1.4.2 Comment by Winny October 18
• Hello @tolgakelesli @regAlex @RJ1234 , May I kindly ask what is the board version of the CrowPanel hardware?

  in Crowpanel esp32 7" touchscreen problem Comment by Winny October 18
• Hello @Bart_SwiatlLnuksa Please check the code for the course at: https://github.com/Elecrow-RD/CrowPanel-Pico-Display-Course-File/ And please follow the video course(https://youtube.com/playlist?list=PLwh4PlcPx2GdvAtPGuAf1ocWj1UyPWw3W&si=ef_4…

  in Ive nuked CrowPanel 3.5 HMI Please help need default firmware and bootloader Comment by Winny October 18
• Hi @Daye The hello world program you downloaded is an example that comes with the Arduino_GFX library and has not been configured according to the hardware circuit of CrowPanel, so it will show black screen. Please refer to this series of courses t…

  in Elecrow 7.0 bricked after uploading HelloWorld.ino Comment by Winny October 18
• Hi @ahmedsamy May I ask which version of your hardware board it is? Please troubleshoot the issue through the following methods: * Replace USB cable * Check if the USB driver is installed * Check if the settings are correct(please refer to: https…

  in MAC Sonoma IDE 2.3.2 (No serial data received.). Comment by Winny October 18
More Comments