Comments

• Hi Thanks for your effort. Using LovyanGFX version 1.1.12 I got the same error as Hugh_Mungus Could you please make a copy of the demofile and make the changes you suggest, compile and publish the code for us. https://github.com/Elecrow-RD/esp32-dis…

  in New 7" Display Comment by SM0PYH March 1
• Hi Thanks for your answer. I could not download the library LovyanGFX.zip Broken link i think Best regards https://forum.elecrow.com/uploads/122/JY9XJ2Z4TL5W.zip

  in New 7" Display Comment by SM0PYH February 29
• Hi Chip is ESP32-S3 (revision v0.2) V2 i gues? Brand new it also have a I2C connector. (pin?) It seems like the display goes from white to black and back again, but what I did in Squarline is not showing up. A 7" demo that support Squareline w…

  in New 7" Display Comment by SM0PYH January 29
• You can just create an account for squareline studio. it is free, but have limitations. //Hans

  in Can -anyone- share a working PltaformIO Project for LVGL (5/ 7" display)? Im desperate! ._. Comment by SM0PYH January 9
• Still not get it to work. Should the settings for UART be set like this? ( I am still trying to get data from an Arduino) Serial1.begin(115200, SERIAL_8N1, 43, 44); // Initiera UART2 för kommunikation med Arduino Mega. Then serial monitor via USB is…

  in 5" esp32 display UART to/from Arduino Comment by SM0PYH December 2023
• Hi it was a misstake by me in my code :-( sorry.... The call for reading did happend without any delay at all. seems to work now. i will do some more testing

  in 5" esp32 display UART to/from Arduino Comment by SM0PYH December 2023
• Hi Yes it is connected and no errors. I send data from the arduino. If i sent with 5s interval it works "OK" but thats is far to slow for my purpose. I am using the USB connection to my coputer at the same time to see whats happening, coul…

  in 5" esp32 display UART to/from Arduino Comment by SM0PYH December 2023