Pearl
Pearl
About
- Username
- Pearl
- Joined
- Visits
- 747
- Last Active
- Roles
- Member
Comments
-
@sky28888 Debain package (.deb) installation requires root permission, thus clicking the "Install" button to start the installation will result with an error, https://forum.elecrow.com/uploads/358/C0ETV2CZE4N2.png The proper installation …
-
I would suggest modifying the /boot/config.txt file with a Conditional Filter to encapsulate all the CrowPi2 specific statements as shown below, near the end of the file. So those statements take effect only with the CrowPi2. From : ... hdmi_force_h…
-
iRaspbian should work with CrowPi2. Just be sure to edit the config.txt file to add the required CrowPi2 specific settings, same as installing other compatible OS's. See CrowPi2 FAQ No. 21.Can I run different OS on CrowPi2 (ex. Raspberry Pi OS, Ret…
-
@lary Thanks for your reply. Is there any plan to provide the standalone install of the Crowpi2 software and its dependencies in the near future? In addition, Debian bullseye is planned for release on August 14th. So RasPi OS should be grading to…
-
@lary For some reason, it seems you were replied to the wrong issue that were commented/posted by @englandd. Please carefully read my original post at the very top. Which is quoted below, https://forum.elecrow.com/discussion/142/is-there-a-way-to-i…
-
@lary Hi, Reading your other reply posts in the forum, you seems to be working for Elecrow. If so, can you kindly give some feedback on this subject please?
-
:)
-
@Celleke I've created a HowTo instructions for setting up Raspberry Pi to boot from USB HDD/SSD. Please take a look.
-
Is there any official feedback on this subject please?
-
@Celleke That power supply is fine. So, no power related issue in your case. Because Raspberry Pi is really picky and requires a good quality power supply with a stable +5V under load.