Pearl
Pearl
About
- Username
- Pearl
- Joined
- Visits
- 665
- Last Active
- Roles
- Member
Comments
-
@Rovman Just a head-up, you will most likely need to manually expand the filesystem after writing a new SD card with this downloaded image. The root partition will still be only 25GB even if you have a 64GB or greater capacity SD card. If you're no…
-
(Quote) I've tested downloading and writing a new copy of the same OS image to a 32GB SD card. It boots and operates correctly on my CrowPi2. But there are some issues. These are my observations: * An error message Failed to load dtoverlay 'pac955…
-
(Quote) It all depends which Raspberry Pi model (i.e. 3B, 3B+ or 4B) you are using. If your Raspberry Pi has 4GB or more memory, it would be a no brainer to use the 64-bit version. The main difference between 32-bit and 64-bit systems is the amount…
-
(Quote) There is only 1 version of Debian 12 (Bookworm) available for CrowPi2, which is the same one from your posted download link. Since it is dated back from 2024-02-03, it would be natural, requiring a large amount of update and I know it is tim…
-
Looking at this product's wiki page, the Battery connector type is listed as PH2.0-2P. Example link of LiPo Battery: (Image)
-
Thanks for confirming your keyboard version. I have updated my previous reply post accordingly.
-
There are 2 compatibility issues with using a Raspberry Pi 5 * Physical interference with the cooling fan, because of the different CPU height and position. * Power requirement, RPi 5 requires a PD 5V/5A power supply.
-
(Quote) Yes, it is perfectly fine. (Quote) No, it is for use with your own experiments. You can follow each learning lessons to learn how to use each modules. (Quote) No, the Status indicator (Blue) shows the wireless keyboard connection status. …
-
Both the CrowView Note and CrowView are peripheral devices requiring a host computer (i.e. Raspberry Pi 5). Therefore, the CrowView cannot be connected with the CrowView Note. If you want a dual monitor setup, both devices need to be connected to a …
-
With the DC 12V power supply connected, please check the following indicators 1. Power Input LED (Red) - Located on the right side next to the DC-In Jack, and lights when DC 12V input power is present. If the LED is not lit, the DC 12V power supply…