Pearl
Pearl
About
- Username
- Pearl
- Joined
- Visits
- 747
- Last Active
- Roles
- Member
Comments
-
Your original issue of 'no scan results' was most likely caused by the WiFi country setting. Now that your WiFi network is visible, but 'failed to connect'. There are 2 possible causes that I can think of, Incorrect password was entered for your WiF…
-
Welcome to the forum! Since you’re just started on your CrowPi2, I would suggest you run the Raspberry Pi Setup Wizard first, it will guide you through the process. Open a Terminal window Type sudo piwiz, then press Enter. Follow the on-screen instr…
-
This is a known symptom when using other custom OS. For a detailed explanation, please read this. Solution for BerryBoot installation: Use a text editor, open the config.txt file under the / (root) directory of the BarryBoot microSD card and add (co…
-
Welcome to the CrowPi2 family ! Yes, BerryBoot will do the tricks that you are looking for. Also, there are multi-boot alternatives beside using BerryBoot as well. Take a look at the following links https://www.raspberrypi.org/forums/viewtopic.php?…
-
@tony Thanks for your invitation. It would be my pleasure being able to offer my help.
-
@tony Trying to edit my previous comment, but it wouldn't allow with the following edit permission error https://forum.elecrow.com/uploads/146/6OPS1VAONYHO.png @chrispitude Currently, there is no method to upgrade the Crowpi2 software alone. The o…
-
@chrispitude Currently, there is no method to upgrade the Crowpi2 software alone. The only way to get the latest Crowpi2 software is to flash a new system microSD card with the latest Crowpi2 system image. I would suggest you flash the new system im…