Pearl
Pearl
About
- Username
- Pearl
- Joined
- Visits
- 714
- Last Active
- Roles
- Member
Comments
-
CrowPi 3: Al Learning and Development Station All-in-One Learning Tool | AI Tech Integration | Multi-SBC Support | Rich Learning Resources | Raspberry Pi 5 Cyberdeck (Image) It is now live at Kickstarter
-
@Tonyd1 I think the Touchscreen interface communicate over I2C, so make sure the I2C interface on your Pi4 is enabled. (Image)
-
Just to confirm! The Pi Zero has 2 microUSB port, 1 for Power input (Right) only and the other for Data (Left). Please make sure you have the Touch interface from RC050 connected to the microUSB port (Left) for Data on the Pi Zero.
-
(Quote) First of all, not all USB-C cables are created equal. CrowView monitor requires a compatible USB-C full-feature cable. A USB-C Data and Charge cable does not necessary classify as a full-feature cable. Make sure your cable shows "full …
-
(Image) CrowPi 3: an Open-source AI Education and Development Station In a world surrounded by technology, most people see only users—not creators. But makers, hackers, and the endlessly curious see more: every smart device holds a hidden invitati…
-
Take a look at these reference links to see if they are useful to you * Product wiki page * Youtube tutorial: Get Started with CrowPanel HMI Screen: Integrate ESP32 into Home Assistant
-
Depends on your physical requirement, there are 180° (U-turn) USB Type-C cable/adapter available, see link below https://www.amazon.com/usb-c-180-degree-cable/s?k=usb+c+180+degree+cable
-
Below is additional info of all connector types on this board. (Image) The same info can be found on the product page toward the end of the page.
-
Try the product page, where there is Youtube video with tutorial lessons and wiki.
-
@Rovman Can you confirm the connector type of the Power Supply used for your CrowPi2 (i.e. DC barrel plug or USB-C plug) please? It seems that the new CrowPi2 version that is compatible with Raspberry Pi 4B/5 uses a 5V USB-C Power Supply. Thanks