Jully
Jully
About
- Username
- Jully
- Joined
- Visits
- 1,072
- Last Active
- Roles
- Moderator, user_manager
Comments
-
Hi Nick, May I ask: Have you configured this in your menuconfig? (Image) If it still doesn't work, you can refer to the configuration in our course： https://www.elecrow.com/download/product/DHE04107D/Advance_HMI_P4_7inch_Course.pdf https://www.…
-
(Quote) HI, ZK_66, Thank you for sharing. Also, the Advance HMI series products likely have more pins; you can search for them on our official website. Best regards,
-
Dear ZK_66, Thank you for sharing and your feedback. We will forward your feedback to the relevant departments for analysis and improvement. Thank you. Best regards,
-
Dear msullivan, Hope you are doing well. I appreciate your support of us. I am sorry, this issue requires some time for our team to analyze. I will get back to you as soon as we finish the analysis. Please wait patiently. I apologize for any inco…
-
Hi HueyHQ, This issue shouldn't be related to your partition changes. Currently, you can download the firmware, but after downloading the program, it doesn't display and has no touch functionality, right? If so, we need to check the configuration …
-
Dear cliveb, We have sent you an email regarding the issue. pls check Best regards,
-
Hi asdf_man, It might not be a chip issue; please try replacing the HDMI cable. Best regards,
-
Dear diapolon, Hope you are doing well. Thank you for your support of us. The 3.5-inch and 5-inch I/O ports are different. The 5-inch port does not have a pull-down resistor; the ESP32-S3's I/O ports "show a high level" at power-on. This…
-
Hi asdf_man, Thank you for your patience in troubleshooting the issue. Sorry, we don't have that document at the moment. However, we'll look for it and get back to you when we find it. ALso, Is your product still under its one-year warranty? Best r…
-
Dear msullivan, This is not an I2C device and is not connected to the motherboard's I2C port (as shown in the picture below). Normally, it does not require an additional resistor and is compatible with our motherboard. (Image) Best regards,