Comments

• HI aggress, Sorry, it seems you're using your own code, right? We apologize, but we can only provide technical support for our sample code and hardware. You'll need to investigate the issues with your code yourself. You can search online or consult…

  in Crowpanel 4.3(v2.1) LovyanGFX(v1.2.19) fillRect doesn't work correctly Comment by Jully March 11
• Hi asdf_man, Thank you for your reply. We'll look for the file you need again. I'll get back to you as soon as I find it. I'm not sure if we can find it. so please be patient and wait. Thank you! Best regards,

  in RC070 7" LCD Display stopped working - SPI Flash Comment by Jully March 11
• HI BlairKent, I am sorry, this issue requires some time for our team to analyze/investigate. I will get back to you as soon as we finish the analysis. Please wait patiently. Sorry for the inconvenience caused. Warm regards,

  in Elecrow 5" ESP32S3 connecting with XBee module and GPIO_D Comment by Jully March 11
• Dear BlairKent, We apologize for any inconvenience caused. For SKU: DIS02170A V1.3, the following link contains tutorials and sample code for the Arduino IDE platform. Please try it: https://www.elecrow.com/pub/wiki/HMI_Display_course.html#version-…

  in CrowPanel ESP32S3 Display - 7.0 inch Advance_series SKU: DIS02170A V1.3 Comment by Jully March 11
• Hi jst, It's possible that the hardware version is incompatible. Your device's hardware version is v1.1. Please try the tutorials and sample programs in the link below: https://www.elecrow.com/pub/wiki/CrowPanel_advance_5.0_ESP32_AI_display_with_Pla…

  in Crowpanel 5Zoll Advance black screen after flashing example Comment by Jully March 11
• HI, viclick, To further handle the issue, could you help provide the following : * Please tell us exactly which of our products you are using. We need to know the SKU No. . Or Please provide the purchase link for the product. so that we can cont…

  in Uploading code from IDE Comment by Jully March 11
• Hi BlairKent, To further handle the issue, could you help provide the following : 1. Please tell us exactly which of our products you are using. We need to know the SKU No. . Or please provide the purchase link for the product. so that we can c…

  in Elecrow 5" ESP32S3 connecting with XBee module and GPIO_D Comment by Jully March 6
• Dear msullivan, Because it occupies the I2C pins, it will cause the touch function to fail. Simply cut off the two I2C pins on the C6 wireless module, and it will work directly without any influience. [Photo](Image) Warm regards,

  in Touchscreen failure on CrowPanel_Advance_3.5 with C6 wireless module Comment by Jully March 5
• (Quote) That's great! Good job!

  in Add BME280 sensor to Crowpanel basic 7inch HMI. Comment by Jully March 5
• Hi RobotSquirrel, The new firmware has just released. Here in the link there are firmware and instructions. Pls have a look. https://www.elecrow.com/wiki/ThinkNode_M6_Outdoor_Solar_Power_for_LoRa_Powered_By_nRF52840_Supports_GPS-868_MHz.html [Phot…

  in ThinkNode M6 Solar Lora - will not charge via solar or USB and will not power on Comment by Jully March 5
More Comments