Jully
Jully
About
- Username
- Jully
- Joined
- Visits
- 1,084
- Last Active
- Roles
- Moderator, user_manager
Comments
-
Dear ， Please try to remove this cable (Image)
-
Hello @Vada , There are examples under the product wiki https://elecrow.com/wiki/CrowPanel_ESP32_E-paper_4.2-inch_HMI_Display.html
-
1.The power chip on the board can only handle input voltages up to 5.5V. Since your vehicle uses 6V, you cannot plug it directly into the battery input without causing potential damage to the board. You will need to convert the 6V down to 5V before …
-
Is there any serial port output after successfully uploading the program? (Quote)
-
May I ask if the touch function still doesn't work with our example code (Image) Please download this example to test.
-
Please download the libraries we modified to see result. (Image) https://elecrow.com/wiki/CrowPanel_ESP32_Terminal_RGB_with_Arduino_IDE.html#build-the-project-with-arduino-ide If you have any further questions please let me know.
-
@SAM, Have you tried the sample code for the website, the touch function still doesn't work？ https://elecrow.com/wiki/CrowPanel_ESP32_Terminal_RGB_with_Arduino_IDE.html#resources
-
Dear SAM Could I confirm what display model you are using?
-
Is this the display you're using? (Image)
-
1.Could you confirm what model of crowpi you have? Is it a crowpi? 2.Is the operating system used the pre-installed Raspberry Pi OS, or did you burn your own? 3.Have you tried the the defaule password is '1' OR 'raspberry'.