Comments

• HI bbroerman, Sorry, we require some time to investigate and analyze the questions you raised. Once our analysis is complete, I will get back to you as soon as possible. We appreciate your patience. We apologize for the inconvenience. Thanks! War…

  in CrowPanel 1.28" with ESP32-C3 Comment by Jully March 17
• HI, viclick, We need some time to analyze the issue. We will get back to you once there is a result. Pls wait patiently. Thanks Warm regards,

  in Uploading code from IDE Comment by Jully March 17
• HI aggress, I am sorry, this issue requires some time for our team to analyze/investigate. I will get back to you as soon as we finish the analysis. Please wait patiently. Very Sorry for the inconvenience caused. Warm regards,

  in Crowpanel 4.3(v2.1) LovyanGFX(v1.2.19) fillRect doesn't work correctly Comment by Jully March 17
• HI aggress, In LovyanGFX's RGB panel implementation, fillRect() ultimately calls writeFillRectPreclipped(). In some versions, there's a bug in the clipping calculation: When width = 1, the internal calculation becomes: x_end = x + width - 1. Then, …

  in Crowpanel 4.3(v2.1) LovyanGFX(v1.2.19) fillRect doesn't work correctly Comment by Jully March 13
• Hi jst, Your device needs to use the code below: https://drive.google.com/drive/folders/1C0YVl4U3yztRGmAO0wx0CdJXmy7noUdp?usp=sharing Warm regards,

  in Crowpanel 5Zoll Advance black screen after flashing example Comment by Jully March 12
• Hi jst, Thank you very much for your feedback. We will relay it to the relevant department for analysis and improvement. Warm regards,

  in Crowpanel 5Zoll Advance black screen after flashing example Comment by Jully March 12
• HI aggress, I am Sorry, this issue requires some time for our team to analyze. I will get back to you as soon as we finish the analysis. Please wait patiently. Sorry for the inconvenience caused. Warm regards,

  in Crowpanel 4.3(v2.1) LovyanGFX(v1.2.19) fillRect doesn't work correctly Comment by Jully March 12
• HI Dhrulian， Are you using the Arduino IDE? You can find relevant information on the wiki website (see below) according to your product SKU number. https://www.elecrow.com/wiki/ Warm regards

  in Crowpnale flash via UART Comment by Jully March 12
• HI BlairKent, This device only has one UART, uart0, that can be used. Warm regards,

  in Elecrow 5" ESP32S3 connecting with XBee module and GPIO_D Comment by Jully March 11
• HI aggress, Sorry, it seems you're using your own code, right? We apologize, but we can only provide technical support for our sample code and hardware. You'll need to investigate the issues with your code yourself. You can search online or consult…

  in Crowpanel 4.3(v2.1) LovyanGFX(v1.2.19) fillRect doesn't work correctly Comment by Jully March 11
More Comments