Comments

• Hi jst, Your device needs to use the code below: https://drive.google.com/drive/folders/1C0YVl4U3yztRGmAO0wx0CdJXmy7noUdp?usp=sharing Warm regards,

  in Crowpanel 5Zoll Advance black screen after flashing example Comment by Jully March 12
• Hi jst, Thank you very much for your feedback. We will relay it to the relevant department for analysis and improvement. Warm regards,

  in Crowpanel 5Zoll Advance black screen after flashing example Comment by Jully March 12
• HI aggress, I am Sorry, this issue requires some time for our team to analyze. I will get back to you as soon as we finish the analysis. Please wait patiently. Sorry for the inconvenience caused. Warm regards,

  in Crowpanel 4.3(v2.1) LovyanGFX(v1.2.19) fillRect doesn't work correctly Comment by Jully March 12
• HI Dhrulian， Are you using the Arduino IDE? You can find relevant information on the wiki website (see below) according to your product SKU number. https://www.elecrow.com/wiki/ Warm regards

  in Crowpnale flash via UART Comment by Jully March 12
• HI BlairKent, This device only has one UART, uart0, that can be used. Warm regards,

  in Elecrow 5" ESP32S3 connecting with XBee module and GPIO_D Comment by Jully March 11
• HI aggress, Sorry, it seems you're using your own code, right? We apologize, but we can only provide technical support for our sample code and hardware. You'll need to investigate the issues with your code yourself. You can search online or consult…

  in Crowpanel 4.3(v2.1) LovyanGFX(v1.2.19) fillRect doesn't work correctly Comment by Jully March 11
• Hi asdf_man, Thank you for your reply. We'll look for the file you need again. I'll get back to you as soon as I find it. I'm not sure if we can find it. so please be patient and wait. Thank you! Best regards,

  in RC070 7" LCD Display stopped working - SPI Flash Comment by Jully March 11
• HI BlairKent, I am sorry, this issue requires some time for our team to analyze/investigate. I will get back to you as soon as we finish the analysis. Please wait patiently. Sorry for the inconvenience caused. Warm regards,

  in Elecrow 5" ESP32S3 connecting with XBee module and GPIO_D Comment by Jully March 11
• Dear BlairKent, We apologize for any inconvenience caused. For SKU: DIS02170A V1.3, the following link contains tutorials and sample code for the Arduino IDE platform. Please try it: https://www.elecrow.com/pub/wiki/HMI_Display_course.html#version-…

  in CrowPanel ESP32S3 Display - 7.0 inch Advance_series SKU: DIS02170A V1.3 Comment by Jully March 11
• Hi jst, It's possible that the hardware version is incompatible. Your device's hardware version is v1.1. Please try the tutorials and sample programs in the link below: https://www.elecrow.com/pub/wiki/CrowPanel_advance_5.0_ESP32_AI_display_with_Pla…

  in Crowpanel 5Zoll Advance black screen after flashing example Comment by Jully March 11
More Comments