Jully
Jully
About
- Username
- Jully
- Joined
- Visits
- 1,150
- Last Active
- Roles
- Moderator, user_manager
Comments
-
Dear Horsepants, During WiFi OTA (Over-The-Air) updates, WiFi may: consume significant CPU resources, consume PSRAM bandwidth, enter a prolonged critical section, disable some interrupts (including those required for I80/RGB refresh), block LVGL's d…
-
Dear feydaykyn , You can also use MakeCode, just like using the micro:bit. https://makecode.microbit.org/#editor Thanks ! Warm regards,
-
(Quote) Dear Luka, The firmware of this device was developed by the meshtastic team in collaboration with us. Generally, if the meshtastic website indicates it as a stable version, it means it is stable. Please use the latest stable version. (Image…
-
Dear Customer , Please provide the code and photos of the device wiring for us to analyze . Thanks! Warm regads,
-
(Quote) Dear Roycejp Sorry for the late reply . Please reinstall the entire Arduino environment. There might be some issue with the environment configuration that is causing the problem. Thanks! Warm regards,
-
(Quote) Dear Marvin , Thank you for the support to us . Sorry, we don't have a repair method applicable to MeshCore. We suggest you contact the developers of MeshCore for assistance. However, we recommend that you first try our solution on Meshtast…
-
Dear deadbeef , Please try to flash the device to the stable firmware version. Thanks! Warm regards,
-
Dear Lantalia, Aabout the use of the keyboard , pls refer to the following image:. pls try if it works. (Image)
-
Dear Customer/Sender, Thank you for reaching out to us and for your continued support. We have received your messages, and our technical support team is reviewing the details. Please allow us some time to look into the matter. We will get back to …
-
Dear Customer/Sender, Thank you for reaching out to us and for your continued support. We have received your messages, and our technical support team is reviewing the details. Please allow us some time to look into the matter. We will get back to …