Comments

• HI Blair , Sorry, we need some time to analyze the issue you mentioned. We will get back to you as soon as possible. Please wait for a while. We apologize for any inconvenience this may cause. Thanks! Warm regards,

  in Crowpanel 5.0 Advance Series V1.1 DIS02050A Brightness Control Comment by Jully April 2
• Dear jcz0824, Sorry, we need some time to analyze the issue you mentioned. We will get back to you as soon as possible. Please wait for a while. We apologize for any inconvenience this may cause. Warm regards,

  in How to replace/disable Elecrow splash screen on CrowPanel CM4? Comment by Jully April 2
• HI, nickp, Sorry, we need some time to analyze the issue you mentioned. We will get back to you as soon as possible. Please wait for a while. We apologize for any inconvenience this may cause. Thanks! Warm regards,

  in HMI Advance esp32-P4 series product Comment by Jully April 2
• (Quote) Hi unimogs， We apologize, but our software department is still developing the ESPHOME sample program for this device, and ESPHOME's support for the ESP32-P4 chip is not yet complete. Therefore, you may need to wait a little longer. Alternat…

  in ESP-Now on CrowPanel Advanced 5inch |ESP32-P4 HMI AI Display 800x480 IPS Touch Screen with WiFi 6 Comment by Jully April 1
• (Quote) Hi DazTheGas， I'm very sorry, but we haven't worked with ESP-NOW on ESP32 P4 yet. You may need to research this issue on your own first. Sorry for the inconvenience . Thanks! Warm regards,

  in ESP-Now on CrowPanel Advanced 5inch |ESP32-P4 HMI AI Display 800x480 IPS Touch Screen with WiFi 6 Comment by Jully April 1
• (Quote) HI, guntherb, We sincerely apologize for any inconvenience this may cause. The same sample program can be used with versions 1.3 and 1.4. Version 1.4 mainly modifies settings such as button length. Are you using our version 1.3 sample prog…

  in CrowPanel ESP32S3 Display - 7.0 inch Advance_series SKU: DIS02170A V1.3 Comment by Jully March 27
• HI, Acuario, Sorry, we need some time to analyze this issue. We will get back to you as soon as possible. Please wait for a while. We apologize for any inconvenience this may cause. Thanks! Warm regards,

  in HMI Advance esp32-s3 series products common FAQs Comment by Jully March 27
• Dear geomeo123, Thank you for your understanding. Sorry, you cannot directly use a UART to connect to RS485. This is a standard UART (TTL level), not an RS485 interface. You must add an RS485 transceiver. Common transceivers include: MAX485, SP34…

  in UART RS485 3.5 inch panel DLC35010R Comment by Jully March 27
• Hi wrknowles, We found that your board and the wiki you are looking at are not compatible. For your device, please see the following pages: Our tutorials and sample code are on these pages: https://www.elecrow.com/wiki/esp32-display-702727-intell…

  in Upload fails with Error code 2 on Hello World Comment by Jully March 27
• Dear PatrickM， We apologize, but this pin can only be accessed via the FPC cable; there is no corresponding pad on the PCB. Thanks! Warm regards,

  in Access gpio pins on CrowPanel 1.28inch-HMI ESP32 Rotary Display Comment by Jully March 26
More Comments