Comments

• HI, viclick, To further handle the issue, could you help provide the following : * Please tell us exactly which of our products you are using. We need to know the SKU No. . Or Please provide the purchase link for the product. so that we can cont…

  in Uploading code from IDE Comment by Jully March 11
• Hi BlairKent, To further handle the issue, could you help provide the following : 1. Please tell us exactly which of our products you are using. We need to know the SKU No. . Or please provide the purchase link for the product. so that we can c…

  in Elecrow 5" ESP32S3 connecting with XBee module and GPIO_D Comment by Jully March 6
• Dear msullivan, Because it occupies the I2C pins, it will cause the touch function to fail. Simply cut off the two I2C pins on the C6 wireless module, and it will work directly without any influience. [Photo](Image) Warm regards,

  in Touchscreen failure on CrowPanel_Advance_3.5 with C6 wireless module Comment by Jully March 5
• (Quote) That's great! Good job!

  in Add BME280 sensor to Crowpanel basic 7inch HMI. Comment by Jully March 5
• Hi RobotSquirrel, The new firmware has just released. Here in the link there are firmware and instructions. Pls have a look. https://www.elecrow.com/wiki/ThinkNode_M6_Outdoor_Solar_Power_for_LoRa_Powered_By_nRF52840_Supports_GPS-868_MHz.html [Phot…

  in ThinkNode M6 Solar Lora - will not charge via solar or USB and will not power on Comment by Jully March 5
• Hi Nick, May I ask: Have you configured this in your menuconfig? (Image) If it still doesn't work, you can refer to the configuration in our course： https://www.elecrow.com/download/product/DHE04107D/Advance_HMI_P4_7inch_Course.pdf https://www.…

  in CrowPanel Advanced ESP32-P4 Display performance Comment by Jully March 5
• (Quote) HI, ZK_66, Thank you for sharing. Also, the Advance HMI series products likely have more pins; you can search for them on our official website. Best regards,

  in Add BME280 sensor to Crowpanel basic 7inch HMI. Comment by Jully March 4
• Dear ZK_66, Thank you for sharing and your feedback. We will forward your feedback to the relevant departments for analysis and improvement. Thank you. Best regards,

  in Elecrow 5 inch esp32s3 upload issue Comment by Jully March 4
• Dear msullivan, Hope you are doing well. I appreciate your support of us. I am sorry, this issue requires some time for our team to analyze. I will get back to you as soon as we finish the analysis. Please wait patiently. I apologize for any inco…

  in Touchscreen failure on CrowPanel_Advance_3.5 with C6 wireless module Comment by Jully March 4
• Hi HueyHQ, This issue shouldn't be related to your partition changes. Currently, you can download the firmware, but after downloading the program, it doesn't display and has no touch functionality, right? If so, we need to check the configuration …

  in CrowPanel 1.28inch-HMI ESP32 Rotary Display - Display and Touch Don't Work. Comment by Jully March 4
More Comments