John_L
John_L
About
- Username
- John_L
- Joined
- Visits
- 23
- Last Active
- Roles
- Member
Comments
-
Yes, I have seen this reply before. I have tested each of the 40 connections using a multimeter and they are all fine and the PCB is connected correctly. If I restart the laptop from the desktop, everything is fine, the software loads and there is n…
-
Thanks for the reply, I have the CrowPi L. John
-
Just a quick fan tip.... There is a far better method of mounting the fan that really cuts down the vibration and fan noise. My fan was stuck to the PCB with the double sided tape. I worked out that the excessive fan noise wasn't due to a loose mo…
-
There is a far better method that works even better. My fan was stuck to the PCB with the double sided tape, so this first option wasn't open to me. I worked out that the excessive fan noise wasn't due to a loose mounting but rather a solid mountin…
-
I've noticed on the 32 bit edition, things seem a little slow in loading, is this 64 bit version any quicker?
-
Isn't there an existing option already available for controlling a fan which isnt used? I'm pretty new to this and whilst I was playing around I saw an option for enabling a fan connected to one of the GPIO ports.