Jennie
Jennie
About
- Username
- Jennie
- Joined
- Visits
- 996
- Last Active
- Roles
- Moderator
Comments
-
Hi, Jan, Thank you for your suggestion. We will record it and consider whether to make example codes for this case. Please stay tuned for updates on our website: www.elecrow.com.
-
Hi, Eugene1951, This is the course link for CrowPanel Advance 5.0-HMI ESP32 AI Display: https://www.elecrow.com/wiki/HMI_Display_course.html Please check the corresponding courses according to the product name. If you have further questions, feel fr…
-
Hi, ummbanaso, Do you mean you coded according the lesson 5 on youtube? To fix your problem, Please confirm: whether the esp32 version (search and install from Arduino's BOARDS MANAGER) is 2.0.14, whether the library file is downloaded from our webs…
-
Thank you for your suggestion. We will record it and consider whether to carry out product research and development. Please stay tuned for product updates on our website: www.elecrow.com. Additionally, Customized requests can be discussed(based on M…
-
Hi bairloch. If you want to make sure that the touchpad is in an available state. You can change the touchpad status by F2 or Fn+F2. when tapping F2 doesnot work, you can try to tap Fn+F2. To rule out keyboard and touchpad issues, remove Bridge …
-
The development work of Pi Terminal-7” HMI Panel compatible with CM5 has been completed, but it is now in the testing stage. Please stay tuned for updates on our website: www.elecrow.com.
-
Dear @lokee , Please use a multimeter to measure whether there is 3.3v.If not ,it's probably a bad circuit board. (Image) You can contact our techsupport@elecrow.com email for follow-up support.
-
Hello, The Advance ESP32 HMI speaker resistance is 8Ω.
-
Hello ， The error message indicates that font 40 is being used—this is a font you defined, right? You need to enable this font setting in the lvgl_conf.h file. Additionally, did the elecrow code successfully compile?
-
I'm sorry for not responding to your message in a timely manner. If you need a quick reply, please send an email to techsupport3@elecrow.com Here is the answer to your question: The resolution aliasing and alignment issues may be the root cause of t…