Jennie

Hi Osbornejeremy, Based on your description, here’s some information that may help: The Base Shield is designed to expand the interfaces but does not supply power to the Micro:bit. When using the Micro:bit with the Crowtail Base Shield, the Micro:…

in Crowtail Starter Kit Base Shield not working Comment by Jennie March 18

Hi, Rayant, Thank you for your reaching out to us. You can use an ADC module like ADS1115 to obtain analog values, as our pins of CrowPanel 7.0 do not support direct analog input. If you have further questions, feel free to contact us.

in Connecting Analog Sensors to CrowPanel 7.0 – Need Guidance Comment by Jennie March 17

(Quote) Hi, Matt10f3, Thank you for your feedback. I am sorry for the inconvenince. Using the SD card and touch functionality normally should not conflict. Please provide your code for analysis. Additionally, could you confirm whether the DIS06043…

in SD Card stops touch working Comment by Jennie March 17

Hi sirocco, The correct spec for the UART0-IN connector is: XH2.54-4. If you have further questions, feel free to contact us.

in DIS02050A : CrowPanel Advance 5“ HMI screen - What's the correct connector type? Comment by Jennie March 14

Hi, Eugene1951 In order for us to further understand your need , please provide the link path for the information of "ESP32 HMI Demo Code Updated - compatible with new version of esp32 package", which was given in your post title. Additio…

in ESP32 HMI Demo Code Updated - compatible with new version of esp32 package Comment by Jennie March 14

(Quote) Hi bairloch, For further customer service, please contact us via email at techsupport3@elecrow.com. In your email, please kindly provide your order number for the products, and we will assist you in resolving the issue.

in CrowView Note - Touchpad and Keyboard not working Comment by Jennie March 14

Hi, wolfcruel， You can wire it this way and ESP32 supports soft serial port, but the effect of soft serial port is not as good as hard serial port and there may be data loss. Optionally, you can use crowpanel 2.8inch in this way: u-blox M8N GPS …

in DIS04028H : CrowPanel 2.8″ ESP32 HMI Display - Connection Comment by Jennie March 14

Hi, Jan, Thank you for your suggestion. We will record it and consider whether to make example codes for this case. Please stay tuned for updates on our website: www.elecrow.com.

in esphome config code for CrowPanel ESP32 E-Paper HMI Displays Comment by Jennie March 13

Hi, Eugene1951, This is the course link for CrowPanel Advance 5.0-HMI ESP32 AI Display: https://www.elecrow.com/wiki/HMI_Display_course.html Please check the corresponding courses according to the product name. If you have further questions, feel fr…

in DIS02050A : CrowPanel Advance 5.0-HMI ESP32 AI Display - Looking for working demo Comment by Jennie March 13

Hi, ummbanaso, Do you mean you coded according the lesson 5 on youtube? To fix your problem, Please confirm: whether the esp32 version (search and install from Arduino's BOARDS MANAGER) is 2.0.14, whether the library file is downloaded from our webs…

in ESP32-S3 4.3inch Capacitive Touch Display Comment by Jennie March 13

Jennie

Jennie

About

Comments