Comments

• HI MrRobot, To further handle the issue, could you help provide the following : * Please tell us exactly which of our products you are using. We need to know the SKU No. . Or Please provide the purchase link for the product. so that we can conti…

  in CrowPanel ESP32 5" - Compiling Error Comment by Jennie January 30
• HI rjp663, The links below contain tutorials and sample projects for this development platform. You can check them out to see if they are helpful. https://www.elecrow.com/wiki/CrowPanel_ESP32_7.0-inch_with_PlatformIO.html https://www.elecrow.com/wi…

  in Looking for Platformio.ini settings for ELECROW ESP32s3 7" HMI Comment by Jennie January 30
• Hi, KIDC0SM0S, I apologize for the inconvenience. Which product are you using? I can send you the corresponding solution. Alternatively, you can search for relevant posts on the forum.

  in what next from Demo firmware Comment by Jennie January 30
• HI, rachel_operator, You can confirm this with the salesperson when ordering it.

  in crow panel advance 4.3 version 1.2 vs version 1 Comment by Jennie January 30
• Hi, Lakesgeek, To further analyze the issue, Could you provide a photo where the message of "my output doesn’t support 5V 5A" shows?

  in CrowView Note - Not enough power for Raspberry Pi 5 Comment by Jennie January 27
• May I ask which Elecrow product are you using?

  in Connecting a Pi 3 or older Comment by Jennie January 27
• Dear hm_heli, Sorry to keep you waiting. We apologize, we've also tested this and it doesn't work. Other products from the Advanced series work fine. The product you're using is from the Basic series. This series might be experiencing this issue d…

  in UART0 issue again Comment by Jennie January 26
• (Quote) Dear James, The link I provided earlier contains .bin files; please take a look. It also includes instructions. Just follow those steps. https://github.com/Elecrow-RD/CrowPanel-7.0-HMI-ESP32-Display-800x480/tree/master/factory_firmare (Ima…

  in ESP32 7inch display V3.0 touch isn't work Comment by Jennie January 26
• (Quote) Hi James, This is the factory firmware: Pls choose the factory firmware according to the hardware version of your device.(It is on the back of the board.) https://github.com/Elecrow-RD/CrowPanel-7.0-HMI-ESP32-Display-800x480/tree/master/fact…

  in ESP32 7inch display V3.0 touch isn't work Comment by Jennie January 22
• (Quote) Hi James, I suggest you first try flashing the factory firmware onto the device to see if the touchscreen works properly. This will rule out a hardware issue. If you cannot find the factory firmware, please send me the device's SKU model o…

  in ESP32 7inch display V3.0 touch isn't work Comment by Jennie January 22
More Comments