Comments

• Dear Penatar, Thank you for your patience while we were looking into this issue. The sensor you are using is a 1-Wire interface and cannot be used on the i2c port. The i2c port and the touch function share pins, and both require an i2c interface to …

  in CrowPanel 5 and Dallas DS18b20 sensors Comment by Jennie April 28
• Dear Wayman， Hope you are doing well. Thank you for your patience in troubleshooting the issue. Apologize for our delayed response due to the weekend holiday. We are very sorry, since this problem does not exist in our example programs, you need to…

  in Rattling sound when SD card image is changed on the display Comment by Jennie April 28
• Hi dfr84, Thank you for reaching out. We are sorry for the inconvenience caused. Our technical support team is currently looking into the issue in your feedback. Please be patient, and we will get back to you as soon as possible. Best regards,

  in DIS05490T : 5" 800x480 Display for RPi - Looking for available 3D models Comment by Jennie April 25
• Dear　penatar ， Thank you for reaching out. We are sorry for the inconvenience caused. Our technical support team is currently looking into the issue in your feedback. Please be patient, and we will get back to you as soon as possible. Best regards,

  in CrowPanel 5 and Dallas DS18b20 sensors Comment by Jennie April 25
• Hi, Rovman, Did you use raspberry Pi 4 inside CrowPi2? or raspberry Pi 5? Please tell us this so that we can further check this issue. Thanks! Have a good day!

  in Servo jitter on CrowPi2 Comment by Jennie April 25
• Hi mcevylder, May I ask if you are using our example/demo program? You can shoot a video so we can see the specific situation. The program can also be sent to us to check. Thanks! Have a good day!

  in DIS03024H : CrowPanel 2.4" ESP32 HMI 320x240 SPI TFT LCD Touch Screen - Noise on speaker output Comment by Jennie April 25
• Dear RacoonDOEggs, Regarding the high-speed refresh problem, we haven't updated the platformIO platform program yet, please wait for us to complete the update. However, the Arduino IDE platform code has been updated. If you consider to change the co…

  in Crowpanel Advance 4.3: Screen glitch when updating widget Comment by Jennie April 25
• Hi, harryskalvi, To help us solve the issue you encounterde, May I ask which product do you use ? You can share the purchase link . Thanks!

  in I2C and Touch Comment by Jennie April 25
• Dear Dougie, Thank you very much for your sharing . Have a good day!

  in Updated Scripts for LR1302 Reset Error with RPi4 & Bookworm Comment by Jennie April 25
• Hi, Larry, Since you have contacted us though email, we have sent you an email about this issue. Please check. Thanks!

  in LR1262 Boot Loader Comment by Jennie April 25
More Comments