Jennie
Jennie
About
- Username
- Jennie
- Joined
- Visits
- 666
- Last Active
- Roles
- Member, Moderator
Comments
-
Dear CurryKitten, The link of the wiki you are looking at does not match the product you are using, so an error will be reported. Please read the Wiki tutorial of your product and use the corresponding code. You can select the product on the left si…
-
Dear CurryKitten, I hope you are doing well. Thank you for reaching out. Sorry for the inconvinience caused. Our technical support team is currently looking into the issue in your message. Please be patient, and we will get back to you as soon as p…
-
(Quote) Dear Ricardo_Rico, 1. Please pay attention to this content : "Currently our course programs are suitable for the old version of hardware. The course programs for the new version of hardware need to be modified according to the factory p…
-
(Quote) Dear Algirdas, Thank you very much for the sharing .
-
Dear Tonyd1, What model of LCD touch screen are you using? Please provide the purchase link for it. This way we can confirm the model and further help you solve the problem. Also, LCD touch screens generally do not have built-in speakers. Thanks!
-
Dear Larry， We alson received your email regarding this isssue. we will reply to you via email. Thanks!
-
Dear penatar, Thank you for your understanding and patience. We tested it and it is true that pin 38 is not working. Even with a pull-up resistor, it still does not work. We also tested the pins of other S3 mainboards and some of them are working an…
-
Hi Bernhard, Thank you for the patience while we were looking into the issue. Please try to set the i2c pins. We see that there is no i2c pins set in your code. Please refer to the following code: include "Wire.h" include "PCF8575.h…
-
(Quote) Hi Bernhard, Our technical support team is currently looking into your issue in your email. Please be patient, and we will get back to you as soon as possible. Best regards,