Jennie
Jennie
About
- Username
- Jennie
- Joined
- Visits
- 998
- Last Active
- Roles
- Moderator
Comments
-
Dear @MrGadget , Please find the attached file.This is the factory code. If you have any questions please feel free to contacr me!
-
Dear @kbqHV , Could you confirm what SKU of Elecrow 5 resistive you want to use?
-
Dear @deepakag , Could you confirm that what the SKU of product you are using?Is it RPD19048A ?
-
Dear @Pavan , This can not be used directly, you need to remove the pull-up resistor on the i2c to work, R41 and R42, remove it. (Image)
-
Dear @maxzorine , There is no error in this program, it is a download error, it may be a serial port or USB connection problem, this error has nothing to do with the program. The error message "A fatal error occurred: No serial data received i…
-
If you follow the steps above and compile the attached code and still have problems compiling, please send me the error message to troubleshoot. I'll assist you further with your problem.Please contact Technical support for help:techsupport3@elecrow…
-
Hello @GLT, It look like that your libraries have problem. Please refer to this link to change your libraries and esp32 version. https://forum.elecrow.com/discussion/963/esp32-hmi-display-compilation-failure/p1?new=1
-
(Quote) This touch is not connected to a Windows computer,this port should be connected to a USB port on a Windows computer. Please test again if the touch work with windows (Image)
-
Hello @baron, Could you please confirm if the ESP 5" display screen can display content normally when used independently and in refresh mode?
-
Could you take a photo of the front and back of the screen?