Jennie
Jennie
About
- Username
- Jennie
- Joined
- Visits
- 997
- Last Active
- Roles
- Moderator
Comments
-
Hello @tomer, Please make sure whether the speaker volume of CrowView Note is 0 and your master device is muted. You can adjust the volume in OSD.Press F7 to enter OSD menu or set up option.
-
I'm sorry we can't get battery level and bettery voltage.
-
Hello, Is the code from your Lesson 13 not working? What errors does it have? Could you try the attached code and see if it works?
-
Hello @dylan , Please see the attached file for schematic and demo code.
-
Hello, Here are some example code and Youtube tutorials Example code: https://github.com/Elecrow-RD/ESP32_S3-Ink-Screen/tree/main/ESP32_S3%20Ink%20Screen%20Information/2.13%20Inch_ESP32_S3 Video tutorials https://youtube.com/watch?v=smDFHRxDYdw&…
-
Hello, Please troubleshoot the issue though these steps: 1.Did you turn the switch on? (Image) 2.Please make sure that your bridge board is fully inserted into the Note's port to avoid no signal due to loose connection. 3.If you have cables,please …
-
Hello @rlopez , I'm sorry to hear that you’re experiencing issue. Let’s try a few troubleshooting steps to resolve this: * Check the HDMI connection: Ensure that the HDMI cable is firmly connected to both devices. Try using a different HDMI cable …
-
Hello， i2c connected, IO4/IO5. (Image) You can view the schematic, attached I hope this help
-
Hello @tinusium Yes，you can charge the Battery with the usb-c port.
-
(Quote) Sorry we didn't do the esphome adaptation for the 1.28 round screen.