Jennie
Jennie
About
- Username
- Jennie
- Joined
- Visits
- 996
- Last Active
- Roles
- Moderator
Comments
-
Hi, MiWa, Thank you for your feedback. We are sorry for the inconvenince. Since this issue may be related to coding and openHASP, we recommend that you post your question on the Discussions area of the following webpage to discuss it with others: …
-
Hi CrowSloth, Thank you for reaching out. The power adapter is available for purchase separately. Please contact us via email at techsupport3@elecrow.com, and our team will assist you with your request. Let us know if you need any further help!
-
Hi, matatools, Thank you for reaching out. Please check whether the power supply meets the 3.7-4.2V, 2A specification. Normally, it should work this way, but please ensure that the polarity is not reversed. If you need further assistance, feel fre…
-
Hi Osbornejeremy, Based on your description, here’s some information that may help: The Base Shield is designed to expand the interfaces but does not supply power to the Micro:bit. When using the Micro:bit with the Crowtail Base Shield, the Micro:…
-
Hi, Rayant, Thank you for your reaching out to us. You can use an ADC module like ADS1115 to obtain analog values, as our pins of CrowPanel 7.0 do not support direct analog input. If you have further questions, feel free to contact us.
-
(Quote) Hi, Matt10f3, Thank you for your feedback. I am sorry for the inconvenince. Using the SD card and touch functionality normally should not conflict. Please provide your code for analysis. Additionally, could you confirm whether the DIS06043…
-
Hi sirocco, The correct spec for the UART0-IN connector is: XH2.54-4. If you have further questions, feel free to contact us.
-
Hi, Eugene1951 In order for us to further understand your need , please provide the link path for the information of "ESP32 HMI Demo Code Updated - compatible with new version of esp32 package", which was given in your post title. Additio…
-
(Quote) Hi bairloch, For further customer service, please contact us via email at techsupport3@elecrow.com. In your email, please kindly provide your order number for the products, and we will assist you in resolving the issue.
-
Hi, wolfcruel， You can wire it this way and ESP32 supports soft serial port, but the effect of soft serial port is not as good as hard serial port and there may be data loss. Optionally, you can use crowpanel 2.8inch in this way: u-blox M8N GPS …