Jennie
Jennie
About
- Username
- Jennie
- Joined
- Visits
- 996
- Last Active
- Roles
- Moderator
Comments
-
Hi Oliver, Regarding your issue, please refer to the image below and try the following code(please put the code in an .ino file). (Image) #include <Wire.h> #include <SPI.h> #include <SD.h> #include <FS.h> #inclu…
-
Hi, rhaugen, Thank you for your patience in troubleshooting the issue. I am sorry for the inconvenience caused. I am sorry that the schematic is not open source.
-
Hi oliver, Our technical support team is currently looking into your issue in your post. Please be patient, and we will get back to you as soon as possible. If you have any additional questions, feel free to ask us. Best regards,
-
Hi, Guille818, Our technical support team is currently looking into your issue in your post. Please be patient, and we will get back to you as soon as possible. If you have any additional questions, feel free to ask us. Best regards,
-
Hi, pbhogan, We’re sorry, but at the moment there are no development plans for an e-paper display of that size. Please stay tuned to our official website for updates: www.elecrow.com.
-
(Quote) Hi, rhaugen, Thank you for your patience in troubleshooting the issue. I am sorry for the inconvinience caused. Our technical support team is currently looking into your issue in your email. Please be patient, and we will get back to you as…
-
(Quote) Hi deathcat99, Yes, you just need to connect a 7.4V battery to the laptop.
-
Hi, Bernhard Thank you very much for sharing this information!
-
Hi albova， Please change the diagram according to the image below. (Image)
-
Hi mshettha, The Pi Terminal 7" can normally connect and work with RS485 sensors without any special limitations. Could you please describe in more detail how you are using it? What is the exact model of the sensor you are using? It would be he…