Comments

• Is there any serial port output after successfully uploading the program? (Quote)

  in Problem running demo program Comment by Jennie January 8
• May I ask if the touch function still doesn't work with our example code (Image) Please download this example to test.

  in TOUCH DETECTION PROBLEM Comment by Jennie January 7
• Please download the libraries we modified to see result. (Image) https://elecrow.com/wiki/CrowPanel_ESP32_Terminal_RGB_with_Arduino_IDE.html#build-the-project-with-arduino-ide If you have any further questions please let me know.

  in Problem running demo program Comment by Jennie January 7
• @SAM, Have you tried the sample code for the website, the touch function still doesn't work？ https://elecrow.com/wiki/CrowPanel_ESP32_Terminal_RGB_with_Arduino_IDE.html#resources

  in TOUCH DETECTION PROBLEM Comment by Jennie January 7
• Dear SAM Could I confirm what display model you are using?

  in TOUCH DETECTION PROBLEM Comment by Jennie January 6
• Is this the display you're using? (Image)

  in 7in LCD Display-C Rev3.3 USB Crystal Oscillator Value Comment by Jennie January 6
• 1.Could you confirm what model of crowpi you have? Is it a crowpi? 2.Is the operating system used the pre-installed Raspberry Pi OS, or did you burn your own? 3.Have you tried the the defaule password is '1' OR 'raspberry'.

  in RaspberryPi 5 is broken Comment by Jennie January 6
• (Quote) Re-burning the Raspberry Pi image https://downloads.raspberrypi.org/raspbian/images/

  in ERROR: Failed to reset SX1302 Comment by Jennie January 3
• Dear @NerdCandy , Please try to use the buster system,our software isn't tested with the latest systems

  in ERROR: Failed to reset SX1302 Comment by Jennie December 2024
• Hello, Is this the ELECROWGW1C LoRa Basic Gateway Module V1.0 you purchased? (Image)

  in LoRa Radio Node v1.0 Information Comment by Jennie December 2024
More Comments