Jennie
Jennie
About
- Username
- Jennie
- Joined
- Visits
- 827
- Last Active
- Roles
- Moderator
Comments
-
Hi, nerdingOut, We haven't released the ESPhome version of the driver yet. Please stay tuned for updates on our website.
-
(Quote) Dear Pedro, After our email communication, your issue has been resolved. If you have any further questions in the future, please feel free to contact us.
-
Dear Pedro, Based on your description, we suspect that the issue might be due to an incorrect version of the ESP32. Could you please let us know which version you are currently using? We recommend trying to use version 2.0.15. (Image)
-
Hi Guille818, Currently, there are no videos or courses available for the EZZ Studio platform. However, there are courses available for platforms such as Arduino IDE, SquareLine Studio, PlatformIO, MicroPython, ESP-IDF, Home Assistant, and ESPHome. …
-
Hi, treo, Thank you for reaching out. Here is some information about your questions. 1. All versions of CrowPi 1 use a 12V 2A power adapter. 2. If powering through the Micro USB port, a 5V 5A power adapter is required. 3. Based on your description, …
-
(Quote) Hi, matatools, Thank you for reaching out. You can use a 90-degree angled USB-C cable to connect to the CrowPanel's USB-C port for power supply, or wire an external power source to the CrowPanel's BAT interface. If you need further assista…
-
Hi Acuario, Thank you for your suggestions. We will record them and carefully consider them for future updates. Additionally, Both of our displays support customization. If you have bulk requirements, we can make changes for you. You can contact thi…
-
Hi, MiWa, Thank you for your feedback. We are sorry for the inconvenince. Since this issue may be related to coding and openHASP, we recommend that you post your question on the Discussions area of the following webpage to discuss it with others: …
-
Hi CrowSloth, Thank you for reaching out. The power adapter is available for purchase separately. Please contact us via email at techsupport3@elecrow.com, and our team will assist you with your request. Let us know if you need any further help!
-
Hi, matatools, Thank you for reaching out. Please check whether the power supply meets the 3.7-4.2V, 2A specification. Normally, it should work this way, but please ensure that the polarity is not reversed. If you need further assistance, feel fre…