Jennie
Jennie
About
- Username
- Jennie
- Joined
- Visits
- 996
- Last Active
- Roles
- Moderator
Comments
-
Dear Penatar, We are very sorry for the trouble and inconvenience this has caused you. We are also sorry for the late reply. 1 Our following products may be able to support this. These products have more exposed pins. If you still want to buy these…
-
Dear phil_seggl, Sorry for the late reply 1. What hardware version do you use? Please take a picture of the back of the device and show it to us. The hardware version is Vx.x on the back of the device, such as V1.0. Then please use our corresponding…
-
(Quote) <3 You are welcome
-
(Quote) Thank you for your support. Thank you also for sharing.
-
(Quote) Hi Nick, Thank you for the patience while we were looking into the issue. Sorry, there is a problem with the design of this place. Connecting a capacitor here will cause the volume to be very low. In fact, it is OK to connect directly withou…
-
(Quote) Hi Nick, Hope you are doing well. Thank you for your patience while we are looking into the issue. Our technical support team is currently looking into the issue in your message. Please be patient, and we will get back to you as soon as pos…
-
Dear nil, I am sorry that 1366x768 is the highest resolution for this device. Best regards,
-
(Quote) Dear Nick, I hope this message finds you well. Thank you for the update. Our technical support team is currently looking into the issue in your message. Please be patient, and we will get back to you as soon as possible. Thanks! Have a nic…
-
Dear phil_seggl, I hope this message finds you well. Thank you for the update. Our technical support team is currently looking into the issue in your message. Please be patient, and we will get back to you as soon as possible. Thanks! Have a nice …
-
Dear Tacos, The link you are looking at does not match the product you are using. Please see the page and tutorial corresponding to this product on the Elecrow Wiki website: https://www.elecrow.com/pub/wiki/CrowPanel_Advance_5.0-HMI_ESP32_AI_Display…