Elecrow
Elecrow
About
- Username
- Elecrow
- Joined
- Visits
- 1,337
- Last Active
- Roles
- Administrator
Comments
-
You can draw a drill hole at the corner. When making the PCB board, the factory will first drill a hole in the corner, and then cut the square outline to finally form the outer outline of the USB you need. (Image)
-
The I043 TX0 should be connected to RXD, and I044 RX0 connect to TXD
-
Please place the libraries we provided to the path: C:\Users\IGOR_NMK\Documents\Arduino\libraries
-
Hello @YAMENEKO, The part you circled is the appearance of the connector. When drawing the package, you only need to draw the fixed feet and pins, and you don’t need to draw the appearance.
-
Hello @jdebruyn , I noticed that you used the delay function here, but this delay function affects the execution of the lv_timer_handler function, which is the function that ensures that LVGL is running properly, and it needs to be executed every 5m…
-
Hello @eperezat , May I kindly ask when working on Linux, which version of the esp32 package do you install?
-
Hello @davidwoolterton , Please check the schematic of the IoT board: https://www.elecrow.com/wiki/image/5/5b/ESP826_IOT_Board_v1.0.zip and the datasheet of the ESP8266-12E module: https://docs.ai-thinker.com/_media/esp8266/docs/esp12e_datasheet.p…
-
Hello @Igor , Please follow this tutorial: https://www.elecrow.com/wiki/ESP32_Display_5.0-inch_HMI_Arduino_Tutorial.html What's more, here's a serial of the video lesson: https://www.youtube.com/playlist?list=PLwh4PlcPx2Ge-h-Pfsa7juFeWMgXmv8lc They…
-
(Quote) Hi, Could you please send us the program so we can check the problem?
-
Hello @CarlLeShaw , Could you please send us the code so we can check?