Comments

• Hello @Spod , I'm sorry, but based on your description, it doesn't seem possible to map the End/Home keys to fn + Right/Left Arrow on the built-in keyboard. Really sorry for the inconvenience!

  in CrowPI L - End key Comment by Elecrow October 2023
• hello@mgaelcrow Due to the utilization of the I2C by the touch functionality, we have run out of available I2C interfaces. We deeply regret any inconvenience this may have caused.

  in esp32 5 inch display WZ8048C050 - how to connect buttons and leds Comment by Elecrow October 2023
• @sniffle Thank you very much for your suggestion. Due to the limited chip resources used, we have abandoned the charging circuit. However, the ESP terminal 3.5-inch screen has a battery charging circuit. Maybe it can be used in your project. We will…

  in enabling LiPo battery charger in ESP32-S3 5 Inch Display? Comment by Elecrow October 2023
• Hello @rava , Could you please send your complete code so we can see if there are any problems?

  in Second motor not working in one direction with Bluetooth projects using crowbit inventor kit Comment by Elecrow October 2023
• Hi @sniffle , Sorry for the inconvenience caused. The ESP32 HMI displays have no battery charging circuitry.

  in enabling LiPo battery charger in ESP32-S3 5 Inch Display? Comment by Elecrow October 2023
• @treo Hi, From a mechanical perspective, Raspberry Pi 5 can be plugged into CrowPi2. However, there is no definite conclusion regarding software compatibility at the moment. As long as I get the conclusion, I will let you know. Thanks for your under…

  in Raspberry Pi-5 Comment by Elecrow October 2023
• Hi @mgaelcrow , Sincerely sorry that due to the limited GPIO interface of ESP32, the available ports are only GPIO_D (IO38) and UART0. I'm afraid it is difficult to connect 4 buttons and 4 LEDs.

  in esp32 5 inch display WZ8048C050 - how to connect buttons and leds Comment by Elecrow October 2023
• @SpareSimian Thank you very much for sharing. Our R&D team is verifying the compatibility of crowdpi2 with the new Raspberry Pi system and with Raspberry Pi 5. I will let you know as soon as there are any results.

  in New Raspberry Pi OS: Bookworm Comment by Elecrow October 2023
• I regret to say that CrowPi L is not compatible with Raspberry Pi 5. First of all, the USB port and Ethernet interface layout of 4 and 5 are different. In addition, there are different power supply requirements, etc.

  in Raspberry Pi-5 Comment by Elecrow October 2023
• Because many users registered with invalid email addresses before, we canceled sending verification emails. Obviously canceling will cause more trouble, so we listen to your feedback and resume sending verification emails. Thank you for your feedbac…

  in Confirming my email Comment by Elecrow October 2023
More Comments