Elecrow
Elecrow
About
- Username
- Elecrow
- Joined
- Visits
- 1,337
- Last Active
- Roles
- Member
Comments
-
Hello @user0815 ， May I kindly ask for a screenshot of the error message? Or you can tell us more details about the problems you met.
-
Hello @atelei , Please refer to the following instruction to modify the driver: https://forum.elecrow.com/discussion/585/esp32-hmi-demo-code-updated-compatible-with-new-version-of-esp32-package
-
Hello Hans， I'm sorry the 5" esp32 display doesn't support dual-mode Bluetooth.
-
Hello @randalstout , The sample program was written in 2023. May I kindly ask what is the old firmware? We plan to write a new sample program, and I will remind the software engineers.
-
Hello @jrodanapolis , The touch is rotated 180°, your button is set at the top of the screen, but it only responds when you touch at the bottom of the screen. Please modify the origins of the x-axis and y-axis
-
Hello @Pearl , Sorry for keeping you waiting. We have completed the firmware, but it still needs to be tested and verified. We will release it soon. Thank you for your patience.
-
Hello @DougWaterford , Please check if the board setting is the as follows: https://forum.elecrow.com/uploads/833/A2EWX2K4AENX.png And may I kindly ask which display drive you use? Is it Arduino_GFX or LovyanGFX? If it's Arduino_GFX, the version of…
-
Hello @randalstout , Display define has changed. https://forum.elecrow.com/uploads/754/TYS4BY8BJ831.png https://github.com/Elecrow-RD/esp32-display/tree/master/5.0/3%E3%80%81arduino/5.0-inch_Squareline_Demo PS. Please read the README.md. the demo …
-
Hello @DougWaterford , The folder Arduino_7inch doesn't need to be copied to .../arduino-1.8.13/libraries. Copy the libraries will be good. And the touch.h file is in the A-7.0-TOUCH folder: https://forum.elecrow.com/uploads/914/3IDWHX0VGK19.png
-
Hello @robkiller , Please check if the board setting is the same as the picture below: https://forum.elecrow.com/uploads/935/X2HJPLI3M7GG.png