Comments

• Hello @trainman75 , The working temperature range of the 5 inch unit is -20℃~70℃

  in Working temperature limits, ESP32-S3 5" HMI Comment by Elecrow February 2024
• Hello @ANX_369 , You can use a voltage sensor or a Lipo Fuel Gauge to read the voltage level of the battery.

  in Battery level on ESP32 Terminal (ESP32 3.5 inch parallel 480x320 TFT capacitive touch) Comment by Elecrow February 2024
• https://forum.elecrow.com/discussion/comment/853#Comment_853 You can download it at https://github.com/moononournation/Arduino_GFX

  in What are the drivers for the esp32 displays? Comment by Elecrow February 2024
• Hello @LYBCE , Please download at: https://www.elecrow.com/download/HMI/VisualTFT_3.0.0.1215.zip

  in WHERE DOWNLOAD VISUALTFT SOFTWARE ???????????? Comment by Elecrow February 2024
• Hello @RussellCofIdaho , Sorry we cannot send power bank separately

  in What are the specifications of the Power Bank that came with the Advanced and Deluxe Kit? Comment by Elecrow February 2024
• Hello @letscode , 0.04 is not supported, the minimum is 0.1mm

  in PCB trace width Comment by Elecrow February 2024
• https://forum.elecrow.com/discussion/comment/857#Comment_857 The GPIO8, GPIO9(SDA1. SCL1) are used. You can connect other I2C item to SDA0, SCL0

  in CrowPi-L FAQs Comment by Elecrow February 2024
• Hello @Hasso , I'm sorry the RC070 touchscreen can not adjust the backlight brightness by software. You can only turn on/off the backlight through the switch. PS. When there's no HDMI signal, the display will leave "No Signal" on the scree…

  in RPI 3b automatic bightness seting Comment by Elecrow January 2024
• Hello Hans, May I kindly ask which version is your 7'' display? Is it V1 or V2?

  in New 7" Display Comment by Elecrow January 2024
• Yes, you can use IO10 , IO11 IO12, or IO13 if you don't need SD card https://forum.elecrow.com/uploads/837/1C9X00GK9BLK.png

  in USB OTG for ESP32 display HMI Display modules Comment by Elecrow January 2024
More Comments